Hi all,

I am currently working on a previously badly bodged NC30. A lot of the stock fairing mount brackets have been removed and replaced with mecano to fit some poor Tyga lookalike knock-offs. I have bought a set of Tyga T10 plastics (uses stock mount points), but in order to fit I have had to buy a new subframe and side stand off eBay, and fairing spacers (£18 from Carward Race Engineering - cheers guys!).

Having had a good scour of the fiches on http://www.cmsnl.com I can't tell if I need anything additional to mount the lower cowl from the right hand side of the bike beneath the step. Does anyone know or, better still, have a photo of how the lower cowl fits to the lower RH side on a stock NC30?

Any help would be appreciated, and I'll post up the finished product for verdict when its done.

Cheers

there should be a bracket aprox 100mm long that bolts onto the frame for the lower r/h side mount cannot see it on the parts fiche but someone should have one spare if yours is missing

It would seem to be yeah. So if anyone out there has one, or knows the part number, I'd be hella grateful

It is item 22 on the cowl parts picture, but not available.
It also holds the water overflow hose.

Dave.

I ordered one from David Silver Spares, took about a month to get to me, but I'm in the US. Just cut and paste the part number into their search and order it up.