Anyone know where I can get the bearing,bushing and seals to replace the rubber mounted bushing on the NC30 unit.
I've been using the NC30 linkage and it's only now when was removing the shock, I noticed how restrictive it is.
Way back, I modified the NC35 linkage to take an RS250 shock and then bought a proper shock.
Doh.

Rick Oliver stocks them.

The parts numbers are:

• 91071-MY1-005 - Needle Race (17×24×17)
• 52465-MY1-000 - Pivot Pin
• 91262-KV3-831 - Dust Seal (17×24×5) x2

They're sitting on my desk, awaiting fitting.

For good photos of the mod. see: Rocker Arm Needle Race Mod

Cammo wrote:Rick Oliver stocks them.

Cheers guys.