Anyone know what is? i.e. the pin on a snug-fitting single-sided rear paddock stand...

banoffee wrote:Anyone know what is? i.e. the pin on a snug-fitting single-sided rear paddock stand...

off the top of my head its 28mm Dia

Really? I am having a nightmare with one of these at the moment.

I have a Bike Lift SSA rear stand and the pin they keep giving me is 28mm. The problem is that it is way too loose! It also only inserts 60mm (of the 90mm that it should)

I went up the garage with a vernier and came up with this:



This is to insert from the left side i.e so you can remove the wheel. Is this the sort of pin that you guys have? I did some searching on here and most of the UK owners seem to use ABBA stands anyway.

I'm really stumped though, so if anyone can shed any light that would be great! The bike shop doesn't list any other pins for Hondas.

Cheers
Luke

lukemillar wrote:Really? I am having a nightmare with one of these at the moment.

I have a Bike Lift SSA rear stand and the pin they keep giving me is 28mm. The problem is that it is way too loose! It also only inserts 60mm (of the 90mm that it should)

I went up the garage with a vernier and came up with this:



This is to insert from the left side i.e so you can remove the wheel. Is this the sort of pin that you guys have? I did some searching on here and most of the UK owners seem to use ABBA stands anyway.

I'm really stumped though, so if anyone can shed any light that would be great! The bike shop doesn't list any other pins for Hondas.

Cheers
Luke

Luke,

I've got that same stand. I got the Ducati right-hand side pin (32mm). The actual pin size you need is 31.5. Luckily I have a friend that has a lathe, so he trimmed the dia. and length for me. Hope that helps.

Sweet! Thanks for that. I was hoping someone would be in a similar situation and have a solution!

I'll order the 32mm ducati pin and get it machined - Thanks for the advice

thank you

Yeah definiteley 31.5mm