I've been referring to this issue as slipping but should I of been saying dragging?

Say I'm tootling along in 3rd, then I decide to accelerate, when I give the throttle a tug the revs spin up and the bike seems like I've pulled the clutch in. It happens mainly in the lower gears, it's becoming a right pain as 2nd is a nightmare, have to be really easy on the throttle and if it spins up I have to back off until the revs drop and it 'catches' again. Is that dragging or slipping?

Also, clutch is fully adjusted so I think it needs either a new set of friction plates or springs (although would it be worth doing both at once for the sake of it?). Thinking of having a go myself as it doesn't look overly complex, parts come out and parts go in.

Cheers,
Dan

Yes it sounds like the clutch is past it's best. If you have a look at the sticky thread at the top of the workshop section on how to replace clutch plates you will find it very useful.

Worth doing the springs at the same time? Also am I right in saying the cheapest/best place to get 'em would be Rick Oliver?