Page 1 of 1

Im after some NC29 Body Panels... Any ideas?

Posted: Tue Jul 22, 2008 7:36 pm
by revved-up
Hi,
Im after a bit of advice, Please excuse the long post.

I am after a complete panel set for my NC29, with tank if possible... Doesn't have to be mint, just a decent set, that can be repainted, or obviously if in good condition useable straight away.

The only panels on mine that are salvageable are the lower side fairings, and probably the tank if I can fill a few small dents.

Ive tried Ebay, and for some reason there is more NC23 stuff than NC29 stuff on there... Aswell as cheap chinese copies, that although look good will no doubt fit crap, and probably turn up in a million pieces! - Anyone had any experience with these?

As NC29 bits are RARE, do any other panels fit? NC23 Panels look similar, or how about CBR600 panels, Ive heard people fit the rear end to the 29. Is it an easy fit, or do you need to weld lugs to the rear subframe?

If anyone can share any advice that would be great.

Thanks, Tony.

Re: Im after some NC29 Body Panels... Any ideas?

Posted: Tue Jul 22, 2008 8:06 pm
by razortooth
revved-up wrote:[...] or how about CBR600 panels, Ive heard people fit the rear end to the 29. Is it an easy fit, or do you need to weld lugs to the rear subframe?
Well, i fit the whole CBR600RR Panels - didn't need to weld lugs to the rear subframe, just drill two or three holes ;)

Greets Melly

Re: Im after some NC29 Body Panels... Any ideas?

Posted: Tue Jul 22, 2008 9:21 pm
by justmartyn
I've got a complete set of original NC29 road panels, not brand new but not knackered either. You can have the lot if you want for next to nothing, the postage from Northern Ireland would probably be the dearest bit. Only problem is I wont be back in the UK to send them till the end of September, so if you can hang on till then you're more than welcome. Incidentally they're white red and purple and I need to keep the tank.

Re: Im after some NC29 Body Panels... Any ideas?

Posted: Tue Jul 22, 2008 9:34 pm
by revved-up
Yes! Ill take them! I was looking for white ones!!

Postage shouldn't be all that, as Northern Ireland Is still the UK. Aslong as you've got a big enough box for postage :lol:

Only problem is waiting for them! lol. I take it you are abroad and back in september then?

How much are you looking for exactly? Pm me please.

Thanks alot, Tony.

Oh and do CBR600 panels really fit then? :)

Re: Im after some NC29 Body Panels... Any ideas?

Posted: Wed Jul 23, 2008 6:58 am
by leopard_pagan
http://www.interparcel.com" onclick="window.open(this.href);return false;

all you need is the over all measurements: long, high, thick and how much it weighs.
i have found that site to be excellent and several choices/quotes

Re: Im after some NC29 Body Panels... Any ideas?

Posted: Wed Jul 23, 2008 8:55 am
by justmartyn
PM sent Tony.

Re: Im after some NC29 Body Panels... Any ideas?

Posted: Wed Jul 23, 2008 11:32 pm
by revved-up
Thanks for the help so far people...

:)

Edit/ and thanks, ive used interparcel before when selling stuff on ebay. They accept paypal aswell which makes it easier.