New Plate
Posted: Tue Jan 04, 2011 1:49 pm
Only slightly not road legal 
Page 1 of 1
Re: New Plate
Posted: Tue Jan 04, 2011 2:12 pm
only slightly
Re: New Plate
Posted: Tue Jan 04, 2011 3:49 pm
Does the size make it even more slightly? 9"x3" 
Re: New Plate
Posted: Tue Jan 04, 2011 5:18 pm
I have a standard size plate - give or take an inch but because it has a honda wing logo on the side, similar in size to a GB symbol, its no longer MOT legal - its has passed for the past 3 years until this year - apparently the ministry is cracking down on it! Ooooooooooooooooooo.
Re: New Plate
Posted: Wed Jan 05, 2011 12:02 am
I'm not sure of the size of mine. 7 x 5?
It's the same size as the standard JDM plate that came with the bike, any larger and you have to move the reflector bracket to accomodate the reg plate.
Not impossible, I have a bike with a rear reflector bracket modded to suit but the standard size looks so much better, plus you don't need to drill extra holes for your reflector. (which is the reason most NC24 dont' have the standard reflector bracket, seems people are too stupid to realise you can mount it lower down)
It's the same size as the standard JDM plate that came with the bike, any larger and you have to move the reflector bracket to accomodate the reg plate.
Not impossible, I have a bike with a rear reflector bracket modded to suit but the standard size looks so much better, plus you don't need to drill extra holes for your reflector. (which is the reason most NC24 dont' have the standard reflector bracket, seems people are too stupid to realise you can mount it lower down)