Hi all, long time no post. Hope you're all well and had a good christmas. Have got to say the sites looking great and its good to see alot of the old names on here still posting along with a fair few new ones

Hopefully one of you Honda nuts will be able to help me with this one, when I fitted my JHA SP1 style exhaust I removed the pillion pegs as they were horrifyingly close to the cans and I'd have cried should they have rubbed against them. Well the time has come where I'd like to be able to take a pillion out every so often, so does anyone know of any pegs that bolt on to the nc30 but don't extend quite as far down as the originals?

If it comes to it I guess I'll have a go at hacking a little out of the originals and then weld them back up but im not sure how easy it'll be to make that look presentable...

Thanks in advance!

I never had pillion pegs on the bike as the VFR was a pleasure bike and wasn't for pillion. Will the NSR (or is it CBR) fold away pillion pegs fit?

Now there's a good thought, think its the NC23 pegs that fold away. Will see if I can pick up a pair to play around with! Oh Got to say I still can't get enough of the look and sound of the exhaust, cheers!