I am looking at changing the side stand on the rvf cos i find it leans over a lot , Is there any other stand that will fit straight on and will leave it standing more upright....cheers

I used an nc29 stand on my nc30 to cure the same problem, not sure that it will bolt on the same to an nc35 but might do.

i think this has been mentioned, the last i heard it was different fitting on the RVF. i'd be interested to hear if this is 100% correct as the amount of lean on the sidestand is scary!

I looked into it and the NC29 stand doesn't fit on the NC35.

Not sure what stand will bolt on but if anyone finds out I'd be interested :)

I might just modify my own and cut it and add in about an inch , I'll let ye's know how i get on ...cheers lads

I have thought that would be the best fix. take some pics of what you do before and after - would like to see and maybe do the same. good luck.

well lads i cut the stand and added in an inch and its spot on

911f wrote:I have thought that would be the best fix. take some pics of what you do before and after - would like to see and maybe do the same. good luck.

oh and dont know how to put pics up

rvfnc35 wrote:

911f wrote:I have thought that would be the best fix. take some pics of what you do before and after - would like to see and maybe do the same. good luck.

oh and dont know how to put pics up

check here for instructions
viewtopic.php?f=5&t=19475