Hey guys,

I have been trawling though youtube for videos of CBR400's.

The ones I am interesting is videos of bikes with full beet, GF or moriwaki exhausts to see what they sound like, also bikes that have had porting work, high rise cams etc.

Also just some good videos of trackdays etc.

Can you guys post some good links please.

Thanks

The best trackday is this I think.. http://www.youtube.com/watch?v=iFgVEjHDE4o it shows a CBR400 mainly racing a GSXR 750, loses in the straight a bit but still keeps up fine, shame part 2 was never uploaded.

heres mine gf ram air box and exhaust hrc ecu

http://www.youtube.com/watch?v=_f4TtxovshQ

Nothing special with mine, just a cut down can and Motad stainless pipes

http://www.youtube.com/watch?v=hbYXjjsBgDo

I have some but no idea how to load them as on hour plus cd's

You possibly need to cut the vids down depending on length and possibly convert depending.

A fair bit of effort for get them up.

So no one else has any good CBR videos to share?

Only video I have is of my NC23 with the engine running in tractor mode, probably not what you want!

http://www.youtube.com/watch?v=OcsSW_gi ... detailpage
Trackday with a badly slipping clutch, had to shortshift everywhere.........
Quietening gears removed, hence the horrible noise! no base gasket (slightly raised compression) ignition advancer, head lightly gasflowed by me, modified air filter, unknown race system and blueflame can, total loss ignition.
SINCE the video I fitted uprated clutch springs, all ok now!
Hope the link works

cheers blueflag.

The linked worked well.

Have you got or could you upload a video of the bike on tick over and then revving so that the microphone can pick up what the bike sounds like with the lack of quietening gears please? :)

Glad it worked ok!
I posted another video (same username) you can hear it on tickover at the very start. (horrible mechanical noise, but the engine seems reliable) If you cant find it I'll post a link.