Hi,

I have just been cleaning up my calipers and noticed that on one side the mounting bolts are hex key job to get out and on the other side they are normal bolts. they are also very slightly different on the way they are mounted.
Is this normal or have I got two different calipers?

I wish I had a Haynes manual for this bike...

Mr Honda will have used the same bolts, some previous owner has just changed them for whatever reason. No drama I'd say. Pics would help.

No thats normal.

The right hand caliper is mounted with normal bolts.

The left hand caliper is mounted with two differnet sized hex bolts that connect to the anti-dive system.