Hi guys.
I have just required a verry nice nc30 in mint condition.
I am after some advice on how to clean it propely & what to clean it with.
I will be verry greatfull for the advice & info.
Many thanks.

Rob.

water......

And elbow grease.

I use Mer on the tank and panels, autosol on the ally bits, wd40 on the black plastic bits, brake cleaner on the calipers followed with a quick buff with autosol and as for the wheels its open for debate viewtopic.php?f=22&t=16255&hilit=cleaning+wheels
Keep on top of it and it wont be such a pain

Im sure banoffee our resident OCD cleaning expert will be along soon

Panels off! And Gunk everything engine downwards! Dont mix it with water use it neat from a cheapo spraycan! And a paintbrush,or mr sheen! It's an excellent degreasant!! then clean everything with a polishing cloth then spray with either acf50 spray or motorex polish and shine! Then rubbing compound ob the tank and panels with a polishing cloth then finishing polish I use Autoglym! Some use other detailing stuff!!

That should bring it shiny!!!

vfrderek wrote:I use Mer on the tank and panels, autosol on the ally bits,

mick.mh2racing wrote:And elbow grease.

dead right, seriously. you can find this stuff in "the factory shop" for a quid and it have to say its the best bike cleaner i have used.
http://cgi.ebay.co.uk/Elbow-Grease-,All ... _500wt_922

Rubbing compound and autoglym super resin polish =

I use my clay bar every now and then, get all the old polish,grime ect ect off and gives you a nice clean base to start from, bought myself some poorboys products a while ago to use on my car and the results were great.