Page 1 of 1
RVF air screw in or out richer or leaner ?
Posted: Sat Nov 06, 2010 3:13 pm
by CRM
I keep ketting mixed up with these, so the standard settings for a RVF are 1 and 5/8s out. does more out mean leaner or richer ?
and am i right in thinking the NC30 is the other way round ?
Re: RVF air screw in or out richer or leaner ?
Posted: Sat Nov 06, 2010 3:49 pm
by thunderace
I thought that turning outwards added more air to the mixture, therefore making the mix leaner. It's been the case with every bike/car I've worked on
Re: RVF air screw in or out richer or leaner ?
Posted: Mon Nov 08, 2010 10:04 pm
by Cammo
RVF - Clockwise (in) to richen
VFR - Clockwise (in) to lean
HTH
Re: RVF air screw in or out richer or leaner ?
Posted: Mon Nov 08, 2010 10:17 pm
by CRM
Sure does pal. Thanks mate
