but I can't find it now, although it could just be me missing it somewhere???

As I cant find it I will repeat my problem, the nc29 just died yesterday, the recovery man pin pointed the problem to a wire that trails out of the ignition block and head down to a soloniod(?) and he suggested that I replace the ignition loom simple enough as it looks easy to replace, anyhow it turns out there is a 2month wait to get one from everywhere I tried so this weekend I will be taking it out to try and fix it. A friend of mine has some sort of electronic wizardry device that can find breaks in wires so he is going to bring that round to find the break in the wire, but thinking about it, rather than cutting out the section that is broken and fixing it, I cant help thinking that it might just be easier to replace the wire.

So really my queston after that rant is.... Does anyone know what wire I would need for the ignition wire, is it a special type or thickness of wire?

thanks

Michael

Some of the wires need to be able to handle large currents (this includes some ignition wiring) and are thicker than the rest of the wires.

Just take a look and buy the same thickness.