where is the best place to get the pistons from ive looked on wemoto, and DSS and both seem to be above the £20 mark for a tiny bit of metal!

does anyone know of where i can get them cheaper?

cheers Rick

does Rick O do pistons?

i found this guy on ebay but i dont have the pistons to hand for the demensions!

http://cgi.ebay.co.uk/Honda-Nissin-rear ... 3caa7e2549

damn it, my pistons are 31mm deep by 25mm diameter, need to find me a machinist!

anyone up for the job?

Probably cheaper and easier to buy a used caliper?

superlite wrote:Probably cheaper and easier to buy a used caliper?

LOL,

i have a used caliper (thanks to mark CMSMJ1) in which im giving a good overhaul!
my bits are off to the powder coater today.

Is that £20 each or a pair,They are stainless arn't they.

hunter wrote:Is that £20 each or a pair,They are stainless arn't they.

£20+ Each mate!

If anyone has a piston for a pattern, I can possibly get the missus to machine some up at work if there's enough interest. I'll see what sort of prices I can get back by end of the week.

thunderace wrote:If anyone has a piston for a pattern, I can possibly get the missus to machine some up at work if there's enough interest. I'll see what sort of prices I can get back by end of the week.

31mm deep
25mm dia

its like a cup when you look at them.

Sort of like this?


Excuse the amateurish attempt with paint.net