Uprated Clutch Spings for NC30/35 - any interest?
Posted: Tue Oct 19, 2010 11:39 pm
NC30 clutch spring sets have now been discontinued by Mr Honda and are no longer available, which has prompted me to talk to my spring maker about producing a batch to fill the gap.
What I have in mind is to produce a spring which is 30% or so stronger than stock so that a stack of three will be equivalent to the usual uprate of using four stock Honda ones.
In order to get the selling price close to the OE figure of around £39.00 a set I will have to order 100 springs (33 sets).
If I`m going to do this I`d like to be able to sell at least half of them fairly quickly to offset the outlay - is there enough interest to make it worth doing...?
Please drop a note on here if you are a potential customer.
As mentioned elsewhere I am also thinking about HRC carb springs for NC30s so let me know if there`s any market for those at around £22.00 a set.
Rick
What I have in mind is to produce a spring which is 30% or so stronger than stock so that a stack of three will be equivalent to the usual uprate of using four stock Honda ones.
In order to get the selling price close to the OE figure of around £39.00 a set I will have to order 100 springs (33 sets).
If I`m going to do this I`d like to be able to sell at least half of them fairly quickly to offset the outlay - is there enough interest to make it worth doing...?
Please drop a note on here if you are a potential customer.
As mentioned elsewhere I am also thinking about HRC carb springs for NC30s so let me know if there`s any market for those at around £22.00 a set.
Rick
