Page 1 of 1

genesis bits on an exup 3en1

Posted: Wed Jul 16, 2008 9:48 am
by Taggyd
Been offered a genesis for £300 all working as a spare bike for the track. It looks like most bits should be interchangeable, does anyone know if this is this the case?

cheers :mrgreen:

Re: genesis bits on an exup 3en1

Posted: Wed Jul 16, 2008 7:49 pm
by Fzr400Trev
as far as i know the farings are differnt fittings
differnet engine moutings

Re: genesis bits on an exup 3en1

Posted: Thu Jul 17, 2008 1:51 pm
by Motorcycle Solutions
Dave Race that bike and just make your race fairing fit that, and get your self some decent lap time in mate...

Also i agree to take that cdi box of your hands mate, if that is all possible to bring it to the next meeting cheers. :D

Re: genesis bits on an exup 3en1

Posted: Thu Jul 17, 2008 3:04 pm
by Taggyd
its was just a look see if the front end etc would be any use for spares etc, not to actually run it on track! As the genesis is a older, it runs but is tatty, and the engine wouldnt be easily transferrable!Besides its just a dodgy plug or lead that caused a few probs last time so easy to sort!
im not doin race of the year, seems too much like a waste of money for one race at the same price for 3 at a normal meet!
Can spend more on the bike over winter then! may just come and watch!

Re: genesis bits on an exup 3en1

Posted: Thu Jul 17, 2008 7:06 pm
by Motorcycle Solutions
Dave i wil try and keep a ticket back for you and matt..

Is still ok to have that cdi....

cheers dave I hope you manage to get it sorted

Re: genesis bits on an exup 3en1

Posted: Fri Jul 18, 2008 9:34 am
by Taggyd
no prob on cdi, will be ready when you are!
let me know if you have a spare ticket, no worries if you don't!
:mrgreen: