Hi,
im building a nc30 race bike and want to run total loss. what do i need to remove? do i need the rectifier?
any help welcome.
Thanks Andrew

Now then..
You need to remove the genny, rotor and all charging wiring - incluing the reg rec.

Also, a goo idea to fir optimate leads so you can charge the bike between sessions.

It works very well...and is as easy as described.

Does anyone have a schematic for the loom on an NC30 with Total Loss please?

Thanks.

999Gomerz wrote:Does anyone have a schematic for the loom on an NC30 with Total Loss please?

Thanks.

No Scheamtic Necessary. Just unplug and leave.

Mike Norman
G-Force Engine Development
http://www.mngforce.com

Or, if you really want to remove some wiring

The generator wires
the reg rec wires

I just removed the burned plug from ym reg rec and left the genny unplugged (as it is attached to the stator coil anyways)

total loss works...