hi guys just want to clear something up, im doing the hydraulic clutch convesion on an nc24. Had the parts sent from a breakers yard master and slave cylinders, sprocket cover and push rod, i was sure the 21 and 24 push rods where different but the one i was sent as a 21 push rod is the same length as the 24 push rod i removed, is this right if not anyone have a 21 push rod spare they want to get rid of????

cheers guys

there different.

The 21 pushrod is longer, the NC24 pushrod is too short for the hydraulic clutch (i've tried it)

There not made anymore and hard to come by.

You can easily turn some steel bar down if you need to amke one.

Sorry but I don't have any hydraulic stuff anymore, ditched them all and went back to cable.

thanks neo knew they wer diff but better to make sure will keep looking for a replacement, or if anyone on here has the tools and no how to make me one up, how much longer is the 21 rod than the 24??

right instead of looking for a nc21 pushrod which is really just a length of steel bar with a rounded end im going to buy a length of the right thickness steel rod cut it to length and round one end off on my grinder, would this work and what is the length and thickness of the pushrod can anyone help with this??
cheers again

Don't you have the NC24 pushrod? Same width, just longer. Only by about 15mm or so.

I'd just put a cable clutch on it personally..

has a cable clutch the bike isnt for me its for my gf and she has a weak left wrist and finds the hydraulic clutch easier on it (she tried it on another bike) and wanted me to put the hydraulic on hers which im doing as what she wants she gets lol

gissmo50 wrote:has a cable clutch the bike isnt for me its for my gf and she has a weak left wrist and finds the hydraulic clutch easier on it (she tried it on another bike) and wanted me to put the hydraulic on hers which im doing as what she wants she gets lol

my mrs used to have weak wrists till she met me

Fair enough, NC21 clutch?

I find they feel very similar

rickyb_dj wrote:

gissmo50 wrote:has a cable clutch the bike isnt for me its for my gf and she has a weak left wrist and finds the hydraulic clutch easier on it (she tried it on another bike) and wanted me to put the hydraulic on hers which im doing as what she wants she gets lol

my mrs used to have weak wrists till she met me

hers is an nc24 that im re-building from the ground up, she just prefers the 21 system to the 24 think its because you compressing fluid rather than pulling on a cable and cam, this bike a labour of love and a bottomless pit on my bank account but its been my dads and now its my gf so deserves to be given a new lease of life.