Are all the 1WG/2TK rear wheels interchangeable, ie will a 3EN1 or 2 wheel fit into a Genesis or 2TK? I know the caliper hangers are different. Definites please, no hearsay or conjecture

have you got the code off the 'spoke' bit, ive got a 3en1 one i can compare for you if you have!

Thanks Taggy, I've got a 3EN1 wheel myself, I just want to know if the 3EN1 and 2 wheels are the same width across the hub as the earlier 1WG and 2TK (as in, will a 17" wheel I have modified to suit a 3EN1 swingarm suit all FZR400s that are saddled with an 18" rear wheel.)

I reckon (so this isn't actually based on fact) the 3EN1 and 3EN2 are ok ... they'll also fit up to a 600 with the right brake carrier. They might fit a 2TK again with the right carrier but less probably the Genesis, as it had narrower tyres than the others.
Narrower tyres could mean narrower swingarm and wheel .... possibly

Evilchicken0 wrote:I reckon (so this isn't actually based on fact) the 3EN1 and 3EN2 are ok ... they'll also fit up to a 600 with the right brake carrier. They might fit a 2TK again with the right carrier but less probably the Genesis, as it had narrower tyres than the others.
Narrower tyres could mean narrower swingarm and wheel .... possibly

if it helps the fzr600 on a 18" think it was 3he went straight in the 2tk

Are you sure the genesis had thinner tyres than the rest evil?
It says 140/60 in the brochure.

I'd of thought they'd all be the same as its a yamaha. They re-use parts all over the place.

martin

I was basing it on my old 3en2 having a 150 ... I'm not sure if that's the right size or not though

genesis and 2tk have the same rear wheel, and as far as i know so does the 3en1( probably the 3en2 as well). all fitted with a 140/60/18 tyre

Yes all the fzr400's pre 3TJ's use the same front and rear wheels. Didn't know there was a difference in the caliper stay though, what's different about it?