right the girlfriends away this week which gives me a week of nights to spend on the bike .

i want to get the all the grime that has built up over the years off the engine is something like gunk the tool for the job?

Gunk is ideal.Get the spray can from Halfords,spray it on generously,leave for five minutes,then wash with warm soapy water,and then rinse down with cold water

can i not get a tin of it and put it into a old squirty bottle i have? works out a lot cheaper

You can indeed. I get five litres of degreaser and do exactly that.
If it's really thick grime, like around the drive sprocket, scrape the thick of it off first.
For really hard to shift stuff I sometimes nick the wifes Mr Muscle oven cleaner, the sort that foams up. Leave it overnight then go back to it with some degreaser, a stiff toothbrush and scotch-bright.
When you've finished a light spray with some silicone will make it easier to clean next time. Soft seal on anything that could rust.

I use gunk in a cheap spray bottle, i dont use soapy water after as it starts pushing the dirt around the bike. I get a wrap of polishing cloth or some rags and keep spraying and wiping clean, hard to clean stuff use a brush, and small areas an old tooth brush.

Oh and use some gloves as you get bloody filthy!!

Kris

Cheers guys looks like I'm off to halfords in a min then .

marcus57 wrote:Cheers guys looks like I'm off to halfords in a min then .

Halfrauds lol.

I must do this all when i get my new engine so its less maintainence to do when its insitue

chownsy wrote:

marcus57 wrote:Cheers guys looks like I'm off to halfords in a min then .

Halfrauds lol.

I must do this all when i get my new engine so its less maintainence to do when its insitue

abit of a rip off i know but its only round the corner.