Hi guys does anyone know what jet sizes r in the kit and how much the kit is worth?
I have a STD bike with a tyga carbon shotgun exhaust and I need jets .
Thanks Alex

You can buy whatever jet sizes you want. You don't need 'kit' jets. HRC list big jets (standard Keihin parts) to suit the HRC set-up, but your bike would be lucky to run with jets that big - bigger is not better in the world of NC carbs

Just pop down to your local bike shop and order whatever size you need. Grab a handful up one or two sizes and go from there I reckon

I run a Tyga carbon end can linked to a half Ethos system and I use 122's all round (NC30) with a set of RO road needles and shes near spot on. I also wound in the pilot screws to 2.1 from 2.25 and it greatly reduced the over-run popping you get with the Tyga's.

emto wrote:I run a Tyga carbon end can linked to a half Ethos system and I use 122's all round (NC30) with a set of RO road needles and shes near spot on. I also wound in the pilot screws to 2.1 from 2.25 and it greatly reduced the over-run popping you get with the Tyga's.

Thanks for you reply. I was recommend 112 in another thread so your jets is quite jump from 112 to 122 lol
Depends on how much jets cost might buy loads an take it to a dyno place
Thanks for your reply

Code2006 - dont forget you have a 35, emto's bike is a 30. different carbs = different setups/jet sizes, confuse the two and your be in a whole heap of trouble.

+1 for the 112's on the 35 :-)

+2 for going to a dyno day with someone who really knows these V4's will save you time, effort, money and frustration in the long run

Oh yer forgot about diffrent carbs ect
Ect.
Ok cool I'm
Gona stick with 112's and try and find a decent dyno place

Are you running a standard filter? if you are then the 112s are what i used to run with similar setup, and it was perfect.

Yer just a normal air filter not sure on make tho but I don't think it would make much difference on make

Just curious but what is it that makes you think you "need" jets to begin with?

Spark plugs discoloured? flat spots? bogging?