ok just an update
bike is 99% complete now and here is a new photo of the bike
added parts are
new bt90 tyres
gold hrc wheels
new grips (will update make later)
new front ebc hh pads

the bike now has an mot so its all good to go :)
all it needs is a very good clean and some new/used front disk bolts as some were rounded off while i was changed wheels over
will update later as well with more stuff that i have changed


Hi
this is my 1st big project so i tought i might as well post it on here.
the bike is a 1994 rvf 400 nc35 which i bought from ebay.
The bike was a track bike and i wanted to change it back to road use so here is the following things i have done and i have to do

i have done
new irs gold x ring chain and sprokets
new clutch cable
full service (oil-filter-plugs)
valve clearence
new front fork seals, dust seals and oil
new front wheel bearings and dust seals
replaced rear sets with original honda ones ( had racing set on)
new HEL braided brake carbon look with black stealth banjo's front and back
new HH brake pads front and back
changed the carbs and choke cable ( reason for this the connection on the carbs were the choke cable connects was broken)
new top and bottom steering head bearings with new top and bottom dust seals

will change
throttel cable ( its on the way)
rear brake lights (dont have to but i have some small led ones)
rear led indicator lights ( i have)
mirrors with led indicators (i have)
full set of carbon fairings (should come 2day)
full tyga shotgun exhaust ( should come 2day) ( it has a full scorpion exhaust aparently)
carbon look clutch and brake leavers (i have)
carbon look bar ends (on the way)
grey pro bolt fairing and screen bolts
powder coat wheels ( not sure on color yet but most prob black)
new jets for exhaust (gavin is sorting this out for me)
carbon fiber rear hugger and chain guard ( gavin is also sorting this out for me :) )

i cant remember what else i have done or will be doing but if i think of anything i will post it

this is what the bike looked like when i bought it


Uploaded with ImageShack.us



and how it looks atm but with out the exhaust



Uploaded with ImageShack.us



i know i have gone a bit carbon mad but thats me lol
anyway let me know what you think and what else i should do or change ect
still not sure on wot color to powder coat the wheels tho
thanks alex

Sounds like your credit card has copped a hammering lately
Can't wait to see what the carbon fairings look like. What brand are they and how much did they set you back?
Good luck with the re-build, can't wait to see the photos.

All the carbon stuff ex the top yoke and speedo panel one and the exhaust all from tyga set me back £2300 lol
But it's worth this. This bike is for keeps

Your c card certainly has taken a beating, The carbon will look luvely, dont spoil it with carbon look kit like levers and bar ends.

As for wheels, HRC gold

Nice project! I really would like to see the outcome with those carbon fairings and stuff for which you have traded your CC in!

cant wait to see it and add the photos to our customers bike section

Well the carbon stuff came 2day but will try and get them fitted to the bike 2moro. I only took the front fender put and it looks sick :)

Gavin thanks a lot for the stuff.
Will be posting pics soon but for your site maybe wait till my wheels r done or change them once I upload new pics with my wheels done?

Ok I now need to find a dyno place in Romford/Essex , a pic of hrc gold wheels and if I like it maybe the paint code for it for a place to powder coat them?

Ok after months of small and big problems my bike is nearly done

Here r some pics of it so far

http://img641.imageshack.us/i/imagepzd.jpg/

http://img825.imageshack.us/i/imagecuh.jpg/

http://img153.imageshack.us/i/imagesli.jpg/

Rear seat unit is not bolted down just yet.
Need 2 change my grips (got them)
Waiting for 4x 112 main jets from david silver spares
Powder coat wheels ( black, gold or chromed ?)
And put the other few carbon bits on but after the bike is finished

Note the mirrors r carbon look with led indicators but might look for some Black ones with led or paint them black

OMG those carbon fibre panels are awesome!!! Bike is looking great. I would maybe go with gold wheels.... but could see black suiting it...

How did the fairing and rear seat unit fit? Just that i was thinking of getting the original shape Tyga fairings.

That carbon kit looks very nice and matches well with the carbon twinstack system! But no to keen on the current combo with aftermarket mirrors with led indicators, dark screen, the rear small indicators and the bright coloured wheels. Fresh owdercoated wheels in black or gold would be lovely.