ok heres a quick update on what iv been up to over the last month and i need alittle help from you guys.
iv started my nc30 project by starting with the looks because i thought id go for the hardest thing first (could be wrong) by trying to fit my k conversions front fairing. it was alittle anoying but i did manage to do it with not too much hastle.

i will be getting pictures up soon but my question to you guys is what tail unit can go on the bike with little hastle. i and quite mechanicaly able but dont want too much stress as i still have a full head of hair and wish to keep it that way. iv looked into the cbr600 route but couldnt find much information on the fitting and stuff. could anyone give me any ideas for seat units from other bikes that would fit the subframe quite easy or a subframe that matches up with the nc30s mounts.

thanks

i have fitted a 600rr tail to my nc30, i used the original subframe and cut it down to accomodate the new shape. though it is short internally and i have no intension of carrying pillions on the vfr so im not worried.

do you still want to carry pillions once you have done the work?

have a look at my build from the begining...

viewtopic.php?f=22&t=8365

thankyou that is a huge help and a fast reply. do you know of any other seat units people are fitting?
thanks

depends how much work you want to do, Riley fitted a mito tail onto his which looked sweet.

viewtopic.php?f=62&t=14112&p=100621&hilit=riley#p100621

there is a picture on google images of a nc30 with a 1000rr body, 2008 model - new shape.

viewtopic.php?f=23&t=13978

depends what you fancy. do you want to carry pillions? if so tyga have released a new tail that will use the original subframe with no modification and looks good to.

viewtopic.php?f=23&t=15308

do you want this to be a quick project or something that will take time? i have my blade for general use so i am not in any rush to get the vfr sorted hence the amount of time it has taken me. but i have looked at bits i have done and thought i could do that another way and make it better so it has been a constant re-evaluation.

yea i want to carry others but i want a challenge but not too much of a challenge. i want to do it over 2 weeks i have off work. i wanted the mito tail but iv looked on ebay and cant find any anywhere

its a duc tail not mito but are not far off the same really

http://cgi.ebay.co.uk/Ducati-748-916-99 ... 20b1848086

not that i am bored at work and there is nothing to do but.....

i think that would look even better

http://cgi.ebay.co.uk/Ducati-748-916-99 ... 41506444a6

lol thanks for all the help. how hard do u think it would be to fit a ducati one on? i may have to give that a go

Hi there, I have a spare mito seat unit available and badbannedbiker has a ready modified subframe available. Alternatively if you have £500 you can have my full professionally painted bodykit with tank (tyga suzuka nose cone/lowers, Mito evo seat unit, modded side panels, modified tyga subframe/battery box).

viewtopic.php?f=17&t=18794

viewtopic.php?f=17&t=18867

Hope this helps, cheers Paul.

ok lets get the ball rolling then. this is how far i have got already. the k-conv kit has been fitted and i have taken it off to start painting it. and im still undesided on the tail unit as i never got a replie about the subframe for the mito tail. here are some pics.






not to evryones taste i know but hopfuly when its done it wont go too far over the top.
more pictures to come soon.

ignor the mess im in the prosess of moving house