Page 1 of 2
Cheap(ish) NC30 HRC velocity stacks on yahoo
Posted: Sun May 30, 2010 11:42 pm
by Cammo
A cheapish set for anyone looking for some. Badly listed, they haven't sold twice now:
http://page3.auctions.yahoo.co.jp/jp/auction/c238423755
Re: Cheap(ish) NC30 HRC velocity stacks on yahoo
Posted: Mon May 31, 2010 8:53 am
by superlite
Someone got happy with an angle grinder!
I wouldn't mind some spares
Re: Cheap(ish) NC30 HRC velocity stacks on yahoo
Posted: Mon May 31, 2010 9:28 am
by Cammo
superlite wrote:Someone got happy with an angle grinder!
Yep, hard sh!t to grind as you'd be well aware superlite!
hrc nc30 v-stacks don't get much cheaper than that. That's only the 6th complete set I've seen for sale (world wide) in the last 5+ years.
Re: Cheap(ish) NC30 HRC velocity stacks on yahoo
Posted: Mon May 31, 2010 9:44 am
by superlite
Cammo wrote:Yep, hard sh!t to grind as you'd be well aware superlite!
hrc nc30 v-stacks don't get much cheaper than that. That's only the 6th complete set I've seen for sale (world wide) in the last 5+ years.
True that. But the art of grinding the carb bracket is in the finesse required to remove what you need to neatly and maintain the integrity (and strength) of the cast bracket. I reckon they nicked the side of the bracket when removing the ribs, and though f#$k it, I'm going for broke! The thing is though, the edges of the bracket obstruct the grinding, but they've cut them off and have still done a crappy job!
Hell, I would have paid double that for 3 HRC stacks at one stage to quell my HRC fever! What on earth would I have done with 3
Spot the angle grinder wanderings:
Re: Cheap(ish) NC30 HRC velocity stacks on yahoo
Posted: Mon May 31, 2010 10:14 am
by Cammo
superlite wrote:
Spot the angle grinder wanderings:
Very nice work, but......
More like spot the loose screw (
) and the cable tie!
Re: Cheap(ish) NC30 HRC velocity stacks on yahoo
Posted: Mon May 31, 2010 10:20 am
by superlite
Cammo wrote:More like spot the loose screw (
) and the cable tie!
Yeah, I must get a cable tie to secure that loose screw
Re: Cheap(ish) NC30 HRC velocity stacks on yahoo
Posted: Mon May 31, 2010 12:21 pm
by Jon
Lightening taken to the extreme?
Cut along the black line.
Over trying to get NC30 carbies to run right with anything other than a standard airbox inlet tract, I have a set of NC35 carbies to play with when i get tinkering again.
Re: Cheap(ish) NC30 HRC velocity stacks on yahoo
Posted: Mon May 31, 2010 5:42 pm
by royster81
how much are them cam ?
Re: Cheap(ish) NC30 HRC velocity stacks on yahoo
Posted: Mon May 31, 2010 8:25 pm
by Cammo
royster81 wrote:how much are them cam ?
They work out to be around 80 quid (plus fees, shipping etc).
Re: Cheap(ish) NC30 HRC velocity stacks on yahoo
Posted: Tue Jun 01, 2010 8:42 am
by superlite
Jon wrote:Over trying to get NC30 carbies to run right with anything other than a standard airbox inlet tract, I have a set of NC35 carbies to play with when i get tinkering again.
Very nice work Jon. Is there any flex in the carbs with that much material removed? Just thinking that they could go out of sync?