Hello gents, set in the float chambers are three jets; main, pilot and a third one which you cant screw out.. Whats this for? Theyr marked 45 on mine

MexicanGringo wrote:Hello gents, set in the float chambers are three jets; main, pilot and a third one which you cant screw out.. Whats this for? Theyr marked 45 on mine

Everythign screws out of the carbs..

You should have.

Main Jet & Emulsion Tube.
Pilot Jet

I think the float holder unscrews.

As above, but there is also a brass tube press fitted in there (something to do with fuel circuitry?), but I've never noticed any markings on them. See Cammo's pic below:



The float is secured by a pin that can be removed.

Yup its the brass tube above the pilot & main in that picture that im talking about, definitely a 45 marked on mine, ive blown through it before but cant remember where it comes out...