Hey all, been awhile, saddly the project that im working on still hasnt come to a close (funny how that works)

and well i coudl really use some help! if any one has some good side pictures of the swingarm linkage dogbone and shock area it would be REALLY helpfull!

also if any one has the dimensions of the linkage (from hole center to hole center, dont need thickness ) that would also be a huge help!

HUGE thanks to anyone and everyone! :D

-Levi

p.s. for the currious

the bike im building has frame designed by me, a K6GSXR600 front end with busa rotors. K4CRF450R motor, NC24 swingarm, Delkevic NC30 16" wheel with PP2ct tire, and a custom axle hub etc.... (soon to also have custom sprocket carrier) pics of the some of the VFR400 stuff below.






there are more pics of the reest of the project here -> http://picasaweb.google.com/Saber63/Spitfire#" onclick="window.open(this.href);return false;

That is actually pretty awesome. I like it!

Using an NC30 rear wheel?

I can take any pictures and measure whatever you need :) I'll be home tomorrow so if anybody hasn't done it i'll get you the information you need :)

AWESOME!!! thanks man! probably the best way to do it is to snap a picture from either side showing the swingarm pivot, shock mount, dogbone mount,and complete linkage, and i can mark on it what i need measurements for, that way theres no confusion

yeah 16" NC30 wheel :) running a 160/60 on the rear, and i can get slicks for it if i want i was thinking about a VFR750 wheel with the NC24 axle.... but after realizing how much it weighed... and that it had a load spec close to what a car would use.... (and my dad said it looked like a honda car axle....... i wondered.......) so i made up a new axle that was only abit less strong (i don't plan on doing to many 2up wheelie jumps ) and the smaller rear fits the bike better, and let me keep the thing narrower. and ~$200 shipped for a never used wheel.... cheaper then most the VFR wheels i found

i also grabbed a 600RR rear shock as that was the cheapest and easiest to find state side that would fit the stock linkage. came with a free linkage and dogbones that i could try using if i needed to!

once i get my build log updated a fair amount more, ill post a link up! right now it s a few months behind.... lol.

Thanks again man!

-Levi

p.s. my email is saber63 at gmail dot com
so if you want to send me high-res (uncropped) photos you can email them. but you can post them here etc... I'm not picky

heyo, never got an email or pm, so if you sent me one it didnt make it anywho im pretty anxios for soem pictures so i can pull the trigger on some design stuff.

but dont worry cause im not really in a rush, just getting to be like a kid on christmas seeing it come toghter

Thanks again for all the help man!

-Levi

Havn't forgot about you dude, just been a hectic week at work, closing some projects off and a lot of unseen issues.

I'll get them done over this weekend as i've switched off from work till monday :)

*Thumbs up!* Thanks man! i understand how bussy life can get (wonder why the bike isnt done? ) lol i was just worried that you emailed them to me and they got lost in the spam...

i might try and find a picture of a diffrent bike, so i can show you what i need mesured, so you dont have to wait for me to send the other one back.... illl post that one up here some time tonight :)

Thanks again man! and hope work calms down abit for yeah!

-levi

Alrighty! picture added :D

if yo ucan grab me mesurments corsponding to all the diffrent lines on this picture, i should be all set! (i can model the whole thing off this info :D )



not my bike also the purple trangle is hte linkage.... and where the purple blue and green all meet is the swingarm pivot in the frame. just let me knowif you need any clarifing.

Thanks again man! and sorry it took abit to get this to you.

-Levi

saber63 wrote: yeah 16" NC30 wheel :) running a 160/60 on the rear

I think you mean 18"!

Looking good.


Have you seen this site: http://www.450gp.com/EN/" onclick="window.open(this.href);return false;

no i think i mean 17" *bangs head*

its this one... http://cgi.ebay.com/ebaymotors/DELKEVIC ... ccessories" onclick="window.open(this.href);return false;

i give up tring ot guess how big around it is.... man wheres the little smiley thats brewing and drinking coffea.... i think that fits right about here :D

sorry about sounding like a major dork


and i have seen the 450 super singles, most likely going to be a better bike then what im building (lighter )

-Levi

ok i take them now :)