Page 1 of 1

NC29 Std Shock - where does the breather hose go?

Posted: Fri Apr 02, 2010 7:51 pm
by marty400
Hiya All,

RE:NC29 Std Shock - where does the breather hose go?

The breather hose was just hanging all the way down, just infront of the rear Tyre!

I gave it a tug and it fell off!


2 Questions:
1. Is it anything to worry about? Will the breather hole get blocked up if I leave the hose pipe off?

2. When I get the around to taking the shock out, to get it serviced, how does the Hose route on the bike, so it dosen't dangle again??


Hope you can advise!

Cheers
Martin

Re: NC29 Std Shock - where does the breather hose go?

Posted: Fri Apr 02, 2010 8:41 pm
by cbr400rrn
Now you have got me flummoxed, a breather hose on a standard shock? You got any pics of it?

Re: NC29 Std Shock - where does the breather hose go?

Posted: Fri Apr 02, 2010 9:11 pm
by marty400
hiya CBR!

It would do, but can't post picture?!!?!?

It is on the Micro Fishes for trhe Rear Shock!

See Here - the other forum! :grin:

http://www.fireblades.org/forums/honda- ... post911060" onclick="window.open(this.href);return false;

Re: NC29 Std Shock - where does the breather hose go?

Posted: Sat Apr 03, 2010 8:32 am
by PARUS
Image

Re: NC29 Std Shock - where does the breather hose go?

Posted: Sat Apr 03, 2010 2:45 pm
by cbr400rrn
PARUS wrote:Image
Is that not the top suspension bolt that pushes through the eye of the shock and into the nut (i think the nut is numbered 13 from what i can make out)
Number 3 in the microfich i never had one on my bike when i got it, im curious now so will have to take a look at my old shock to see if it ever had one.