I'm tryin to find out what sprockets cross reference to the NC29 for the front and rear. I can't just walk into a Honda Dealership here, they look at my like I'm retarded when I say NC29 or 400RR.

Why walk in to a Honda dealer. They will rip you off a the bike is grey.
Use Grahame France and get C&S in 520 to suit. Why do you want 520? Are you racing? I'd stick with 525 Heavy duty Xring. What weight you gain, you can lose in a diet in a week. Plus less maintenance

as for me, i need 520 conversion coz it is easier to find a chain..525 size seems to be odd in my country.

anyone have the info TS asked please share with us.

Yes I'm racing it, and it's easier and cheaper by a ton than getting ANYTHING from there. A sprocket and chain set
here will cost me about half of the same kit bought there and mailed here. Which is why I'm asking the question regarding the bikes it cross references to.

What do you need spocket or chain? I think best source is http://www.jtsprockets.com/52.0.html.

Chain is same I you just need 520\525 chain with 102 chain links.

I'm using CBR900RR / T / V / W / X 1996-1999 spocket for rear with 42 teeth and 525 chain.




NC29 spockets has following dimensions

Where're u from ?

I live in New Orleans, LA in the USA. They never produced this bike here so I can't get parts. I see the 900RR rear will work but will the front? And yeah I need to get the whole 520 conversion. And actually the rear crosses with F4i, 900RR and a RC51. But I need the front badly.

You can get front and rears through JT sprockets, contact the US office:

http://www.jtsprockets.com/52.0.html?&L ... uid=321&p=" onclick="window.open(this.href);return false;


I sent Greggo a VFR400 front sprocket and it fited his nc29, just noticed the part number is the same for JT between these models also. Probably doesn't help much in the USA, but there are sure to be other bikes that from the era use this sprocket.

CB500 front fits - but whether it comes in 520 I don't know.

Well it turns out that the front is a JTF565 in a 520 pitch. Which is a Kawi 650R front. I also found out that the 900RR will fit but the holes that the studs go through are a little too big. Buuuuuuuuttttt.............. the 99-02 R6 sprockets fit perfectly.