Page 1 of 2
					
				Wanted 3TJ top (headlight) fairing
				Posted: Wed Jan 06, 2010 7:57 pm
				by plodder
				Rough is OK.  Local to Stockport is better.  Cheap would be nice 
 
 
Ta 

 
			
					
				Re: Wanted 3TJ top (headlight) fairing
				Posted: Wed Jan 06, 2010 8:30 pm
				by Evilchicken0
				Make a queue ...  

 
			
					
				Re: Wanted 3TJ top (headlight) fairing
				Posted: Wed Jan 06, 2010 9:02 pm
				by cagiva996
				yep,behind me!!!! 

 
			
					
				Re: Wanted 3TJ top (headlight) fairing
				Posted: Wed Jan 06, 2010 9:46 pm
				by Evilchicken0
				cagiva996 wrote:yep,behind me!!!! 

 
You can borrow it on wednesdays
 
			
					
				Re: Wanted 3TJ top (headlight) fairing
				Posted: Thu Jan 07, 2010 10:05 am
				by Taggyd
				can i borrow it on fridays please! 

 
			
					
				Re: Wanted 3TJ top (headlight) fairing
				Posted: Thu Jan 07, 2010 1:08 pm
				by Evilchicken0
				Only if you dance for it
			 
			
					
				Re: Wanted 3TJ top (headlight) fairing
				Posted: Thu Jan 07, 2010 6:31 pm
				by plodder
				Boo!
I was wanting the option of running it on the road in the summer.  I might just dremmel out a hole for the light out of a race fairing.
			 
			
					
				Re: Wanted 3TJ top (headlight) fairing
				Posted: Fri Jan 08, 2010 9:50 am
				by Evilchicken0
				Do race fairings fit the standard subframe then ???
The lights are held on with the top fairing's bolts and if they're kept it might be an alternative
			 
			
					
				Re: Wanted 3TJ top (headlight) fairing
				Posted: Fri Jan 08, 2010 11:10 am
				by Taggyd
				they do go over the standard frame, but just mount to the frame like the lower fairings and the mirror brace as they tend to be one piece top and sides so dont need the top mounting bracket most get cut cown to just the clock mounts though to keep things clear at the front. you could add fairing indicators rather than the sticky out ones and should be ok!
			 
			
					
				Re: Wanted 3TJ top (headlight) fairing
				Posted: Fri Jan 08, 2010 1:05 pm
				by Evilchicken0
				I'd like to keep it mounted through the clocks (4 mounts) if possible - I was thinking about taking a mould and plastexing something together. 
I'd probably change to indicator mirrors if I was going to all that trouble