Page 1 of 1
Trick Race NC23 Dyno Print out
Posted: Fri Jun 20, 2008 8:17 pm
by GF Racing
Sure you will like this NC23 printout - desperately need one of Chris' Tri Arm Ram Air Boxes - you reading this Chris !!
Cheers
Graeme
Re: Trick Race NC23 Dyno Print out
Posted: Fri Jun 20, 2008 11:21 pm
by cbr400rrn
74 hp
I think that one could be a race winner Graeme
Re: Trick Race NC23 Dyno Print out
Posted: Sun Jun 22, 2008 11:13 pm
by Cammo
That's a monster!
What internal engine work has it had?
Re: Trick Race NC23 Dyno Print out
Posted: Mon Jun 23, 2008 9:41 am
by stimpy
hmmm...taken from the wheel or the crank graeme?
ive just modded a nc29 ram air box to my 23...its hauling now(1.6 seconds faster around phillip island...u know,that vid on youtube that was posted up)
havnt had it on the dyno yet
stimpy
Re: Trick Race NC23 Dyno Print out
Posted: Wed Jun 25, 2008 1:55 am
by chrisxr
what was the tourque figure on that 23 graham? done some more work to the one i started a while ago we were getting 70 on my dyno out of it but im hoping i will see a little more with these carbs and the new ignition.
am doing some boxes this week we have spent all week trying to get the molds more usuable so fingers crossed with the outcome
Re: Trick Race NC23 Dyno Print out
Posted: Wed Jun 25, 2008 1:26 pm
by LozVTR
Im just starting a NC23 project so if anyone has any good ideas for mods etc, please let me know because ive got a blank canvas at the moment.....
are there any website / links to thing which people have done rather than searching the site for days on end...LOL
Re: Trick Race NC23 Dyno Print out
Posted: Thu Jun 26, 2008 12:43 pm
by stimpy
ive modded most of my nc23 thru this forum loz...i havnt found anything better yet
there are a few of us on here who try different things...just ask
stimpy
Re: Trick Race NC23 Dyno Print out
Posted: Thu Jun 26, 2008 1:35 pm
by LozVTR
thats cool, thanks
are there any common mods which most people do? just to get me started.
Re: Trick Race NC23 Dyno Print out
Posted: Mon Jun 30, 2008 9:26 am
by stimpy
suspension...contact grame for the rear link to suit a cbr600 rear shock and set up
17inch rear wheel from the nc29
just for starters
Re: Trick Race NC23 Dyno Print out
Posted: Mon Jun 30, 2008 10:19 am
by LozVTR
nice one thanks stimpy,
Il more than likely be mailing you again in the near future for tips/advice if thats cool with you?