My NC30 is completed!
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
TJenkos
- Settled in member
- Posts: 60
- Joined: Mon Jan 05, 2009 10:56 pm
My NC30 is completed!
After coming off last September, Ive slowly been rebuilding my VFR back up better than ever and this weekend went up and down the drive on it! I think its ready for its MOT! Just lacking the dosh around the festive period, though I suppose at least there isnt sun teasing me!
Unfortunately when fitting the fuel tap rebuild, I left the tank upside down overnight and the small amount of fuel found its way out the cap and under the paintwork.. Its bubbled a lot and wont really go awa, so I think thats going to need re-doing!
Im missing the overall pictures, so will have to get some uploaded tomorrow..
Bit of info includes
Honda VTR1000 SP2 Paintjob by Cordwells
Powdercoated wheels
Powdercoated Fork legs
Powdercoated Yokes
Powdercoated Sidestand
Powdercoated Footpegs
Anodised Fork Adjusters
Rebuilt forks with new seals and oil
Replaced pads all round
Replaced air filter
Replaced spark plugs
Red coloured rear braided hose
Tastynuts Fairing bolts
Tastynuts bar ends
Tyga endcan
Replacement studs, nuts and gaskets
Bridgestone BT-090's
Tinted screen
Red rim tape
Replacement front wheel
Renthal grips
Fuel tap rebuild
I can't remember anything else so that will have to do!
Cheers
Tom
Unfortunately when fitting the fuel tap rebuild, I left the tank upside down overnight and the small amount of fuel found its way out the cap and under the paintwork.. Its bubbled a lot and wont really go awa, so I think thats going to need re-doing!
Im missing the overall pictures, so will have to get some uploaded tomorrow..
Bit of info includes
Honda VTR1000 SP2 Paintjob by Cordwells
Powdercoated wheels
Powdercoated Fork legs
Powdercoated Yokes
Powdercoated Sidestand
Powdercoated Footpegs
Anodised Fork Adjusters
Rebuilt forks with new seals and oil
Replaced pads all round
Replaced air filter
Replaced spark plugs
Red coloured rear braided hose
Tastynuts Fairing bolts
Tastynuts bar ends
Tyga endcan
Replacement studs, nuts and gaskets
Bridgestone BT-090's
Tinted screen
Red rim tape
Replacement front wheel
Renthal grips
Fuel tap rebuild
I can't remember anything else so that will have to do!
Cheers
Tom
-
royster81
- NWAA Supporter
- Posts: 2509
- Joined: Wed Apr 30, 2008 8:04 pm
- Bike owned: VFR400R-L NC30 CBR400RR-R NC29
- Location: Belfast,Northern Ireland
Re: My NC30 is completed!
pictures man pictures ...
It's not having what you want but wanting what you've got....Loud ,Proud and Modified ....
-
w00dzy
- Site Supporter
- Posts: 514
- Joined: Sun Oct 12, 2008 10:44 pm
- Bike owned: Aprilia RSVR Mille
- Location: Hampshire
Re: My NC30 is completed!
sounds good.. pics please! 
-
fixer
- Site Supporter
- Posts: 104
- Joined: Fri May 02, 2008 3:10 pm
- Bike owned: nc30/bsab25
- Location: beverley, east yorkshire
-
banoffee
- Site Supporter
- Posts: 1247
- Joined: Sat Aug 01, 2009 7:44 am
- Location: Surrey
- Contact:
-
Bill
- Settled in member
- Posts: 133
- Joined: Fri Mar 20, 2009 12:08 am
- Location: Lincoln
Re: My NC30 is completed!
im also nearing copleation of my 30 after a fight with a car witch i lost way back in april!.. 
+1 on the pics!
+1 on the pics!-
bridgey
- Site Supporter
- Posts: 91
- Joined: Fri Sep 19, 2008 2:01 pm
- Bike owned: NC30,CG125 FJS600 SILVERWING
- Location: Manchester
-
rcv4
- Site Supporter
- Posts: 247
- Joined: Fri May 15, 2009 11:11 pm
- Bike owned: 2xnc30 nc35 rd200 xt500 dt250
- Location: east yorkshire
Re: My NC30 is completed!
my 35....no where near !!!
-
TJenkos
- Settled in member
- Posts: 60
- Joined: Mon Jan 05, 2009 10:56 pm
Re: My NC30 is completed!
Think I should have got pictures BEFORE making this thread! 