Page 1 of 1
Carb part needed. Any ideas?
Posted: Thu Jun 19, 2008 4:49 pm
by bettyswollocks
I need a part for a set of nc30 carbs. Honda dealer reckons its NLA. Any ideas who/where to try?
Part number is 16026-mr8-003 which is a tee piece between the carbs. (No4 on the fiche) If its not available then I could make one if its just a tee-piece or is there more to it than that such as a valve inside or something. I haven't got one to copy unfortunately.
Re: Carb part needed. Any ideas?
Posted: Fri Jun 20, 2008 12:10 am
by chrisxr
which T peice is it ihave many carbs in peices
Re: Carb part needed. Any ideas?
Posted: Fri Jun 20, 2008 9:08 pm
by bettyswollocks
Its no 4 on here
http://www.akhara.com/nc30/nc30parts/files/17.htm
I would be most grateful if you have a spare for sale.
Re: Carb part needed. Any ideas?
Posted: Mon Jun 23, 2008 4:27 am
by superlite
I've got a few spare, but I'm one the other side of the pond.....
Re: Carb part needed. Any ideas?
Posted: Mon Jun 23, 2008 12:02 pm
by RVFHooligan
superlite wrote:I've got a few spare, but I'm one the other side of the pond.....
You're on the other side of TWO ponds, and big ones at that!
Re: Carb part needed. Any ideas?
Posted: Tue Jun 24, 2008 4:05 am
by superlite
RVFHooligan wrote:You're on the other side of TWO ponds, and big ones at that!
Depends which way you look at it I guess
It's interesting to note that Honda upgraded these T-peices from the NC21/24 style which don't swivel. Mr Honda may have made a bad move.....