Page 1 of 1
					
				1993 bandit crankcase gasket
				Posted: Mon Nov 09, 2009 9:41 am
				by rvas0008
				Hi there,
Where can I get a crankcase casing gasket for a Japan import bandit 400 ? I've already checked at robinsons's and weemoto in  vain!
			 
			
					
				Re: 1993 bandit crankcase gasket
				Posted: Tue Nov 10, 2009 8:10 pm
				by Variablevalves suck
				hi, which gasket are you after? the one behind the clutch cover or the starter cover. I can post you the part No. and you should be able to get them from any Suzi dealer.
			 
			
					
				Re: 1993 bandit crankcase gasket
				Posted: Thu Nov 12, 2009 6:59 am
				by rvas0008
				my mistake sorry. I meant the gasket which sits on the RHS of the engine where there is the oil window, for the whole cover. The cover has a small dent and oil is seeking out. I would weld it but I have to change the gasket.
			 
			
					
				Re: 1993 bandit crankcase gasket
				Posted: Fri Nov 13, 2009 12:42 pm
				by rvas0008
				BTW, I am finding fuel just beneath the bike and the garage is smelling heavily of fuel. Could it explain why I could not start the bike. Everytime it seems like getting to start but it doesn/t eventually
			 
			
					
				Re: 1993 bandit crankcase gasket
				Posted: Fri Nov 13, 2009 10:15 pm
				by Variablevalves suck
				Part No. for the gasket is 11482-32C11. Regarding the fuel is it coming from the carbs, tank, head gasket or is it in the oil thats coming from the casing, you'll have to put some paper under the carbs and engine and after some leaks out follow it back to its source.
			 
			
					
				Re: 1993 bandit crankcase gasket
				Posted: Thu Nov 19, 2009 6:34 am
				by rvas0008
				it seems as it trickels very slowly from the carbs.. the stench of fuel in the garage is incredible. I think it is flooded, second time in 2 weeks.. any reasoning ?
			 
			
					
				Re: 1993 bandit crankcase gasket
				Posted: Sat Nov 21, 2009 12:05 am
				by Variablevalves suck
				It will be either bad o'rings or more likely a sticking float. You probably got something stuck between one of the needle valves and its seat.