Page 1 of 1
Speedo Drive
Posted: Mon Jun 16, 2008 1:08 pm
by Wraith
Does anyone have a working Speedo Drive for a 3en1 knocking about that they would like to part with
The one on the bike at the moment has a mind of it's own
And will only work when it wants to
Re: Speedo Drive
Posted: Mon Jun 16, 2008 1:16 pm
by Evilchicken0
That sounds more like the drive isn't picking up from the wheel. Theres a bit under the dust seal that has a tab on it ... check it's ok. I don't know for certain but I expect a 600 drive would fit too.
Re: Speedo Drive
Posted: Mon Jun 16, 2008 6:12 pm
by Wraith
No it's def the drive
Can turn the drive via the tabs
But the end where the cable goes in does not always turns
Re: Speedo Drive
Posted: Tue Jun 17, 2008 8:33 pm
by fzrtim
If it is the same as the 3he (600) then i think i have one (if i can find it) that you can have.
Re: Speedo Drive
Posted: Fri Jun 20, 2008 5:56 pm
by Fzr400Trev
got 2 spare here
off a 1wg / 3en2
pay the postage you can have it
trevorb2007@btinternet.com
Re: Speedo Drive
Posted: Sun Jun 22, 2008 1:46 pm
by Wraith
Re: Speedo Drive
Posted: Sun Jun 22, 2008 7:07 pm
by Fzr400Trev
Wraith wrote:
1wg Please
Email sent
email set to you too lol :D
Re: Speedo Drive
Posted: Mon Jun 30, 2008 10:41 pm
by CMSMJ1
On a related note...is there a blank for the speedo drive on the front wheel? I am not using a speedo on my trackbike and want to blank it - or..do I just leave it out?
Re: Speedo Drive
Posted: Tue Jul 01, 2008 9:20 am
by Taggyd
ours is just left out but thinking of putting a rubber plug into it to keep it muck free!
Re: Speedo Drive
Posted: Tue Jul 01, 2008 9:51 am
by CMSMJ1
Cheers Taggy.
Got that cush drive sorted too mate - thanks.
Am collecting the rest of my bits and bats for my 400 this weekend so will get cleaning and assembling and figure out what else I do not know about these little Yams.. :D