money no object
Posted: Thu Oct 08, 2009 10:51 pm
if money was no object wot would you buy for your vfr/rvf ??????
http://www.400greybike.com/forum/
money no object
Page 1 of 3
Re: money no object
Posted: Thu Oct 08, 2009 10:58 pm
Carbon Body kit n carbon wheels
Re: money no object
Posted: Thu Oct 08, 2009 11:58 pm
A Garage.
Re: money no object
Posted: Fri Oct 09, 2009 12:01 am
What abr said^
Plus
Ohlins radial superbike front end
Carbon discs
Translogic dash
Ally Tank
Big bore motor with FI and ram air
Magnessum swing arm
Full TI SP1 style system
Shilloette endurance style bodywork
Carbon subframes, clock mount and brackets
now where did the mrs hide that credit card
Plus
Ohlins radial superbike front end
Carbon discs
Translogic dash
Ally Tank
Big bore motor with FI and ram air
Magnessum swing arm
Full TI SP1 style system
Shilloette endurance style bodywork
Carbon subframes, clock mount and brackets
now where did the mrs hide that credit card
Re: money no object
Posted: Fri Oct 09, 2009 12:46 am
nice shopping list drunkn munky think lotto more than credit card though !!!
Re: money no object
Posted: Fri Oct 09, 2009 12:57 am
Buy a high spec engineering workshop.
Taking a leaf out of John Britten and thingamy Csyz books i'd use the VFR/RVF as a basis and build a new engine and chassis from scratch that Honda would build today if they had the balls.
Taking a leaf out of John Britten and thingamy Csyz books i'd use the VFR/RVF as a basis and build a new engine and chassis from scratch that Honda would build today if they had the balls.
Re: money no object
Posted: Fri Oct 09, 2009 1:36 am
Every single snap-on tool available...I always find myself half way through a job and then i think....gargggh, feck, i havn't got a 947mm socket head...
Re: money no object
Posted: Fri Oct 09, 2009 5:02 pm
An RC45 :D
Re: money no object
Posted: Fri Oct 09, 2009 6:04 pm
A paddock girl to hold an umbrella over me when I am getting ready to go out on rainy days.
AL
AL
Re: money no object
Posted: Fri Oct 09, 2009 6:38 pm
i'd put 3 spoke mags on this bike, rebuild and blue print the motor with some RVF pistons,ported heads etc etc and find the time to ride it.
and for this bike i'd ask chris at dynopro racing to build me a 433cc motor,ported heads etc etc and magtec rims with a working rear shock and not the showa thats in there.
the track bike would stay as it is cause lets face it i am going to keep falling of it and i'd finish the road bike so i could use it to get to work....hold on...i'd be stinking rich so i'd just ride the bikes each day...
what about you RCV4 ?
and for this bike i'd ask chris at dynopro racing to build me a 433cc motor,ported heads etc etc and magtec rims with a working rear shock and not the showa thats in there.
the track bike would stay as it is cause lets face it i am going to keep falling of it and i'd finish the road bike so i could use it to get to work....hold on...i'd be stinking rich so i'd just ride the bikes each day...
what about you RCV4 ?