Hi everybody,


I want to witdraw the ignition barrel of my nc30 (because this is a track bike) .
Does someone know how to do? With the wire I think ...

Thanks in advance ,
neuro

Really easy. Just trace the wire down the right hand side of the bike. It's a red connector block. What I did was cut the ignition off and fit an On-Off switch but I know some have fitted it through their kill switch.

viper_biker wrote:Really easy. Just trace the wire down the right hand side of the bike. It's a red connector block. What I did was cut the ignition off and fit an On-Off switch but I know some have fitted it through their kill switch.

You just fitted a switch instead of the ignition barrel and it worked Great

I'm gonna try to find an on/off switch.
But I would like first to fiddle with the wire, in order to connect them on the kill switch.


I'm happy this is possible because my honda dealer (in France) told me the contrary In his defence, we haven't so many nc30 here

Just in case nobody knows, where did you buy your on/off switch?
Thanks,
neuro

You can wire the ignition into the kill switch, or if you don't feel that adventurous, just solder in a plain old toggle switch.

superlite wrote:You can wire the ignition into the kill switch, or if you don't feel that adventurous, just solder in a plain old toggle switch.

Yes, I would like to wire the ignition into the kill switch. But I don't know how to do
And my abilities are not gonna help me lol