Hey there,

After rebuilding the NC30 and losing various important bits, I now need a replacement indicator mount..

However, is this part a genuine Honda part or aftermarket for different indicator fitments??





Whichever so, does anyone know where I can get a replacement, or even a pair which have the same job?

Thanks

Please, anyone?? I want an MOT

Not quite sure which bit you're refering too, if you mean the rubber bit then yes it looks OEM *but* AFAIR the NC30 indicators bolt to the subframe and pass through the fairing, that looks more like the NC35 way the indicators are mounted.

I haven't got a clear shot but this one of post cadwell crash damage shows it on the NC35



Of course I've not got an NC30 so someone may correct me on this but see this which shows how the front indicators bolt on a '91 UK bike (of course Jap bikes may be different)
http://www.bike-parts.fr/pieces-promo-4 ... 2400-.html" onclick="window.open(this.href);return false;

Regards

Druid

Thats spot on. Im reffering to the rubber which is between the indicator and the fairing. It looks the same as whats on the crashed picture of yours...

So, I need the rubber bit from an NC35..

no TJ you need a jap nc30/nc35 rubber bit, the Uk bikes had the indicators that bolted to the subframe.
i'm sure there is someone on here breaking a jap bike with the rubber bits, if not i'll look in the garage for some.

royster81 wrote:no TJ you need a jap nc30/nc35 rubber bit, the Uk bikes had the indicators that bolted to the subframe.
i'm sure there is someone on here breaking a jap bike with the rubber bits, if not i'll look in the garage for some.

See, I told you there would be someone along in a second to say I'm wrong! :-)

Bah! Looks like I'm at the back of the queue for these!

I'm after the same bits I think...

Just got a Tyga (original style) kit. Indicators (not original) are currently attached to frame but don't poke out enough when fairing is on.. and fairing has the three hole indent on it...

Is that the same thing we are talking about? A rubber bit to sit in the indent? The indicators on the frame are just a single M10 bolt I think....

http://www.flickr.com/photos/25226001@N02/3772615354/

TheDarkGlove wrote:Bah! Looks like I'm at the back of the queue for these!

I'm after the same bits I think...

Just got a Tyga (original style) kit. Indicators (not original) are currently attached to frame but don't poke out enough when fairing is on.. and fairing has the three hole indent on it...

Is that the same thing we are talking about? A rubber bit to sit in the indent? The indicators on the frame are just a single M10 bolt I think....

http://www.flickr.com/photos/25226001@N02/3772615354/

Yeah, that's the indent the NC35 (and as royster81 points out Jap NC30) indicator rubber sits in.

Druid

Thanks Druid and all before,

Now the hunt begins...

Have you tried the usual places?

David silver spares are pretty good for Honda bits but you might want to try Graeme France or Rick Oliver who are on the forum.

Druid