hello, id first like to say that while i wish i could own a VFR400, i live in the states, and they just dont existe here, so im instead turning a ninja 250 into a FREAK.

and the first order of bussiness is the NC24 swing i bought from the UK (damn shipping hurt).

my swing arm came with a fair amount of the parts but not all. and im having a hell of a time finding the parts fich for the suspension linkage.

so i was hoping some of you great fellows would be able to take a picture of your suspension linkage for me :) im needing to know how the linkage interfaced with the frame shock and swing arm. picutes or a fiche link would be perfect!

and secondly, becaue this swing arm is going to mount to a difren frame, i can offset it however i please.... so my question is... are there any 17" wheel option that will fit a 150 or prefeably a 160. rember i can use any wheel offset.

and lastly i was wondering where i could get some much larger rear sprockets(in the USA) or atleast some info on sprokets. (this is to better match the litle 250CC engie that will be driving a larger wheel)

i think that about sums up my first post :) i would like to thank everyone in advance for there help.

and if you guys want to see the whole project...... check out my build thread :)

-Levi

p.s. http://www.customfighters.com/forums/sh ... hp?t=21908" onclick="window.open(this.href);return false;

Hi saber,

welcome to the forum.

I have a mate who has an nc24, i'll see what the crack is for pictures as im sure he has the back end in bits anyway to refit a new shocker he's just bourght.

apart from the pics i cant really offer you much else as im not over familier with the nc24....

i'll see what i can do for ya tho pal.

regards,

Dan

Hello!

Interesting choice there.

I can't see any reason why you canu fit VFR750/800 rear wheels to the axle

I have taken you pictures of the fiches you asked for. I hope this helps.

http://www.jacksons-lair.co.uk/nc24xx/shock.JPG" onclick="window.open(this.href);return false;
http://www.jacksons-lair.co.uk/nc24xx/swingarm.JPG" onclick="window.open(this.href);return false;
http://www.jacksons-lair.co.uk/nc24xx/axle.JPG" onclick="window.open(this.href);return false;

hey neo,

where you been? you aint posted in a while!

first id like to say thank you to both you. and apologize for not getting back to Danzio . i kinda messed up my thread subscription setting while signing up

HOWever the fiche pictures are PERFECT!

a BIG thanks!

i may end up needing another picture, but i dont think its in the fiche, its of the frame where the dogbones and axle pivot are.

but im not sure if i need those yet....

again.

Big thanks everyone!

-levi

Danzio wrote:hey neo,

where you been? you aint posted in a while!

work work / no play / drink beer / repair bikes / work :)