Page 1 of 1

RVF400 gear change issue

Posted: Mon Jul 06, 2009 3:39 pm
by alexandervf
I have this bike for almost 8 years and as long as i can remember i've been facing the following problem mostly in the winter time...

The problem: When i start the bike in the morning (while the engine is still cold) changin gear from 1st to 2nd is like having to lift a 30 pound rock with your left foot (Not to mention that neutral at this period is almost impossible to change).

After a few miles (while the engine now is warm) the gear change is a lot smoother than when i started the bike.

Any help is welcome and most appreciated.

Warm regards

Alex

Re: RVF400 gear change issue

Posted: Mon Jul 06, 2009 3:53 pm
by viper_biker
Firstly, welcome to the forum. My first suggestion would be to adjust the little spiggot at the end of the lever adjustment rod. Mine is at about 11 o'clock and it works well for me there on clutchless up-shifts.

Image

Re: RVF400 gear change issue

Posted: Mon Jul 06, 2009 4:03 pm
by alexandervf
You've got a point there ....sorry for rushing in like this.

What you suggested is something that i haven't tried yet, but i still don't understand why the gear change is smoother when the engine is warm...

Re: RVF400 gear change issue

Posted: Mon Jul 06, 2009 10:46 pm
by Cammo
What sort/weight of oil are you using?

Re: RVF400 gear change issue

Posted: Tue Jul 07, 2009 3:14 pm
by alexandervf
I use Motul 10/40 300v...