Page 1 of 1

rick oliver nc30/35 tunning article

Posted: Tue Jun 09, 2009 1:21 pm
by mo haggs
hi guys, i saw the above on this forum somewere a while back but i cannot find it again
can any one point me in the right direction?

Re: rick oliver nc30/35 tunning article

Posted: Tue Jun 09, 2009 4:37 pm
by RickOliver
I don`t know where it is, but it`s about 10 years old and badly in need of updating...!

Re: rick oliver nc30/35 tunning article

Posted: Tue Jun 09, 2009 7:58 pm
by mattjc
I've got one called Engine Modifications by Rick Oliver is this the one your after? If so what's your email and i'll send it over!

Matt

Re: rick oliver nc30/35 tunning article

Posted: Tue Jun 09, 2009 9:47 pm
by mo haggs
i think thats the one.

rick its just for a rough guide to bhp

reson being i cant get in contact with the guy who knows whats inside my race bike,
APPARENTLY it has HRC this and HRC that.
i have not had it on the dyno yet as i was waiting to talk to this guy.

fed up waiting i've thought f##k it, i'll put it on the dyno and see what she's putting out.
then i should get a rough idea whats done to the engine.

running an eye over the bike, it has:-
HRC exhaust
HRC carbs (well short velocity stacks at least)
also sounds like the quietening gears have been removed

the rest of the bike looks standard to me.

matt its morris_haggerty@hotmail.com

thanks. mo.

Re: rick oliver nc30/35 tunning article

Posted: Tue Jun 09, 2009 10:06 pm
by Smev
Isn't it the tech tips bit on http://www.nc30club.co.uk" onclick="window.open(this.href);return false; ? I thought it used to say by Mr R.O. at the end but seems like they've just copied it as their own?

Smev

Re: rick oliver nc30/35 tunning article

Posted: Tue Jun 09, 2009 10:21 pm
by mo haggs
Smev wrote:Isn't it the tech tips bit on http://www.nc30club.co.uk" onclick="window.open(this.href);return false; ? I thought it used to say by Mr R.O. at the end but seems like they've just copied it as their own?

Smev
thats a different one.

what im looking for is a rough tunning/bhp guide
i.e.

standard motor = 1bhp

full exhaust system + hrc carb set up = 2bhp

system+carbs=gasflow=3bhp



i know no two bikes will be the same and there are many factors that will contribute to the outcome

Re: rick oliver nc30/35 tunning article

Posted: Wed Jun 10, 2009 12:08 am
by hunter
Is this the one mo.http://www.akhara.com/nc30/nc30manuals/ ... Oliver.pdf" onclick="window.open(this.href);return false;

Re: rick oliver nc30/35 tunning article

Posted: Wed Jun 10, 2009 7:55 am
by mo haggs
aye thats the boyo.

cheers guys.

it could be a while but i'll let you know the outcome of the dyno and tinkering ;)

Re: rick oliver nc30/35 tunning article

Posted: Wed Jun 10, 2009 9:27 am
by padawan
hunter wrote:Is this the one mo.http://www.akhara.com/nc30/nc30manuals/ ... Oliver.pdf" onclick="window.open(this.href);return false;
Hi Mo,

The information following that link seems similar to what's in the pdf I sent you, did you receive it ok? I replied straight away.

Re: rick oliver nc30/35 tunning article

Posted: Wed Jun 10, 2009 10:59 am
by mo haggs
just checked my mail and yes i got it thanks. its the same one - the one i was looking for.
cheers ;)