Dynopro do +1 and +3 pistons most likely omega

I don't know about the fzr rings.

Tony you know how much they are?

Dont know pal best to give him a ring as you wont get hold of him via email

Jason, Dear Santa brought me a set, a couple of years ago.
Please don´t be mislead by the dust on top of the box...



Inside everything is still bright and shiny...





I hope to have time and money to get them into an engine. Some day.

man those look sweet as fook!!

fourfingers wrote:Jason, Dear Santa brought me a set, a couple of years ago.
Please don´t be mislead by the dust on top of the box...



Inside everything is still bright and shiny...





I hope to have time and money to get them into an engine. Some day.

Nice! Keep it nice and locked or I will come to spain someday
I had the idea I should have bought a set of these pistons back at that time, rightnow I still want to buy a set of cosworth.

Back in those days there was also a topic for omega's, it is this one...
viewtopic.php?f=22&t=15106&p=151099&hilit=pistons+1mm

If you do come to Spain drop me a line, you are most welcome to stay home. Also a nice garage for your bike to rest. And yes, I will keep the piston set in a safe place... just in case

About the Omegas, that din´t end up well, if I´m not mistaken.

Pistons are still a possibility. I have 3 vendors I am working with, Cosworth being The top choice. The more interest I get here, the better the chances to get Cosworths. Otherwise, my 2nd options are still an excellent route. Rods are no problem.

Choices are:
56mm or 57mm bore (both use Yamaha FZR400 rings)
STD, +1.25mm or +3.00mm (HRC) rod lengths

Please PM me if you're interested so I can start getting an order together.

Mike Norman
G-Force Engine Development

Pm sent

+1 PM sent.