Page 72 of 112
Re: xivlia's thread of nc30 problems and questions
Posted: Sun May 20, 2012 11:46 pm
by xivlia
just measured it. and its giving all sorts of numbers... 0.3ohm, 600ohm infinity ohm. and when i move the chassis probe around, it gives me fluctuating readings, and when i keep the probe still, its giving me infinity.
Re: xivlia's thread of nc30 problems and questions
Posted: Mon May 21, 2012 12:01 am
by magg
What point on the chassis are you using?
Re: xivlia's thread of nc30 problems and questions
Posted: Mon May 21, 2012 12:33 am
by xivlia
the non anodized part. near where the negative lead connects.
Re: xivlia's thread of nc30 problems and questions
Posted: Mon May 21, 2012 12:44 am
by magg
I would suggest that you examine the battery -ve lead and its connection points at the battery terminal and chassis closely for a defect. The resistance from the -ve terminal of the battery to a OEM earth point on the chassis should not be higher than the reading you get when the multimeter probes are shorted together i.e. if multimeter readings 0.3 ohm with probes shorted then -ve battery terminal to chassis earth point should also read 0.3 ohm.
Re: xivlia's thread of nc30 problems and questions
Posted: Mon May 21, 2012 7:55 am
by vfrman
Those grips are Rizoma, aren't they??
Re: xivlia's thread of nc30 problems and questions
Posted: Mon May 21, 2012 8:10 am
by xivlia
Rizoma? whats that?
Re: xivlia's thread of nc30 problems and questions
Posted: Mon May 21, 2012 11:59 am
by Neosophist
xivlia wrote:i have a haynes manual.... and i have used it.... the starter clutch was broken so i changed it. but when the starter clutch broke, something else broke with it, hence why the electrical system is fucked up. and i dont know what it is.... thats my problem. the haynes manual isnt helping me with that thats why im asking here... ive went through the whole ignition system section on the manual and tried everything and everything is fine..... but still no spark. you guys are my last resort for help. if it not in the book, then i ask here.
I said
Honda manual.
You can download the service manual written by the people who made the bike. It has many useful informations inside it. You should already have it.
Re: xivlia's thread of nc30 problems and questions
Posted: Mon May 21, 2012 1:00 pm
by vfrman
Re: xivlia's thread of nc30 problems and questions
Posted: Mon May 21, 2012 2:36 pm
by mo haggs
xivlia wrote:Rizoma? whats that?
Re: xivlia's thread of nc30 problems and questions
Posted: Mon May 21, 2012 5:10 pm
by vfrman
Fucking expensive, that is what they are!
