hi sorry another one for the list could i get a copy as well please? cups79@live.co.uk Thanks :)

here you go mate, i feel sorry for the lad that keeps sending em :)

Damien

Any tips on removing the shims without a magnet, Halfords and Mcquillans didn't have any.

Lasse wrote:Any tips on removing the shims without a magnet, Halfords and Mcquillans didn't have any.

A dod of grease on a flat-head screw-driver, but you can't beat the magnetic pen though. Just be very careful.

not a chance in hell i would go at it with anything but a magnetic pen.
like gareth says that dab of grease trick is recommended by the haynes manual.
its not that hard to get the cam covers off and get the TDC right and all the rest of it, the measuring of the shim tolerances isnt even that hard, but taking them out and then putting shim back in is near on impossible by yourself and close to possible with a helper. ( i do have very fat fingers tho!!)
my advise is hang on for another day or two and get the magnet before you go at it.

ill take a copy to please seanjess@blueyonder.co.uk
thanks :D

could i please get a copy sent to me

justinlykke@hotmail.com

if there isnt a writeup about balancing carbs yet could you tell me in which order to balance the carbs?

forwarded on buckos

Sorry to bump but really need these, could someone ping them over to me?

oliherst(at)hotmail.com

Thanks!

mail sent oli