Few pics

Undertray on and all wires connected





Aftermarket indicators to help with spacing the cans in



Rick Oliver rads all connected up



Poorly dymags which will be getting redone in a couple of weeks

Nice! The RVF forks really suit it.

pure porn is that and it is

this is the first proper look at ur bike ive had and as you can tell i like a lot

sam

Cheers ,

Have a load of new ti bolts to go on , if I can escape the missus I wil try and get them and the brake lines on tonight

Managed anit of time in the garage tonight .

spent most of my time fitting some new Ti boilts and tidying up the wiring .









I have hit a snag with my rear banjo light switch though , its to long meaning i cant get the bolts for the rear master cylinder to line up . Time for some head scraching.

double post

Now the bikes nearly complete i thought i would put a spec up of it ,

1991 vfr400 nc30

Maxton worked nc35 forks
Nitron track rear shock
Tyga nc35 yokes
Ses nc35 clip ons
Brembo radial master cylinder
cbr600rr calipers rebuilt with Ti bolts
Braided brake lines
Ti front wheel spindle bolt
Stainless front pinch bolts
EBC prolites
Dymag 5 spoke wheels
Silhouette upper and mids
Oe honda lowers
Tyga rc45 solo rear seat unit
Alcantara seat
Painted in OKI suzuka 8hr scheme
Carbon fairing infills
Ses aluminium fairing bracket
Rick Oliver upper and lower race rads
Hrc rad overflow bottle
Rick Oliver gsxr genny conversion
Tsr Ti exhaust system
Carbs jetted to suit above
Ses rearsets
Rick Oliver Aluminium race sub frame
Hrc rear brake hose
Wavy rear disc
braided rear hose
Carbon rear chain guard
Renthal chain and sprockets
Ti rear wheel nut
Ti rear wheel spacer
Ti hub nut
Ti hub adjuster bolt

Also just fitted my private number plate

Again had a few spare hours ,

Had a nightmare getting the back end sorted but its all fitted correctly now.





Changed the damaged leaver on the brembo mc and fitted a remote span adjuster , not sure on it yet ( will trim the hose once i have the bodywork fitted)





My new plate and a pic i like of the front

New rearsets here and fitted , they are lovely





Opinions on this , im not 100% on it



Was happily fitting the bodywork back on properly ,



Until



It didnt even go tight it just spun and this is the result so i got angry and packed it all away.

Not much left to do now.

Tank pad