Hi Rick

Could you email me the specs for the HRC curve, I should be OK with putting them in thanks.

Give me a shout when you have the carb bits sorted and I will grab them off you.

thanks
jon

Hi Rick,

Would you be able to send me the ign file too? I would like to try it against my DIY one.

I will send you mine if you are curious....

cheers

Jon - Mailing those curves to you is on my `to do` list for the weekend - I`m afraid the engineer has put the delivery date for NC35 HRC kit components back to `end of March`...

Mark - I`m not sure that we know each other well enough to get into an `I`ll show you mine if you show me yours` scenario...

RickOliver wrote: Mark - I`m not sure that we know each other well enough to get into an `I`ll show you mine if you show me yours` scenario...

Now, come on Rick.... Did I get the wrong end of the stick...

Just teasing - I`ll send them over at the weekend...

Hi

A few qs, the box is fully progeammable, does it come with two maps installed? Normal and HRC for the 35? I have a set of Marawaki pipes I presume I should use the HRC Map for track use. Do you need to rejet and if so is there a carb kit available?

Hi all
I know its digging up an old thread
Just wondering what sort of results they had from fitting these?
i people could list their mods + the power gains over std ignition i would greatly apreciate it

Cheers
James

Review:
http://www.400greybike.info/newforum/vi ... a&start=10" onclick="window.open(this.href);return false;