Re: HRC Bellmouths for NC30
Posted: Sat Dec 31, 2011 6:30 pm
And all credit for the perfectly modded carb tray goes to jim lad And all credit for the perfectly modded carb tray goes to jim lad
http://www.400greybike.com/forum/
HRC Bellmouths for NC30
Page 6 of 7
And all credit for the perfectly modded carb tray goes to jim ladRe: HRC Bellmouths for NC30
Posted: Sun Jan 01, 2012 7:51 pm
I'll give you a call tomorrow Rick, need to arrange collection with you if at all possible 
Re: HRC Bellmouths for NC30
Posted: Wed Jan 04, 2012 6:21 pm
Bellmouths arrived today, many thanks.
Re: HRC Bellmouths for NC30
Posted: Wed Jan 04, 2012 7:27 pm
and mine arrived to, thanks again.
Re: HRC Bellmouths for NC30
Posted: Thu Jan 05, 2012 5:52 pm
Got mine. Nice work.
Thanks.
Thanks.
Re: HRC Bellmouths for NC30
Posted: Thu Jan 05, 2012 6:07 pm
You also need:Drunkn Munky wrote:Needlesmarcus57 wrote:Trying to sort out the carbs on my nc trackbike , apart from the bellmouths what other parts do i need to complete the set up
Jets
Emulsion tubes
Pilot jets
Slides
Drill the carb tray
Just buy the stacks and carb kit from rick then you just need slides (NC24 will do) and mod the carb tray
Fibreglass / CF air tray
(and also lose the airbox and cushion under the tank)
Re: HRC Bellmouths for NC30
Posted: Fri Jan 06, 2012 10:28 pm
...and remove the vacuum operated diaphram from the fuel tap.
Re: HRC Bellmouths for NC30
Posted: Fri Jan 06, 2012 10:31 pm
Cammo wrote:...and remove the vacuum operated diaphram from the fuel tap.
Nearly there now , just need the airtraylukemillar wrote:You also need:Drunkn Munky wrote:Needlesmarcus57 wrote:Trying to sort out the carbs on my nc trackbike , apart from the bellmouths what other parts do i need to complete the set up
Jets
Emulsion tubes
Pilot jets
Slides
Drill the carb tray
Just buy the stacks and carb kit from rick then you just need slides (NC24 will do) and mod the carb tray
Fibreglass / CF air tray
(and also lose the airbox and cushion under the tank)
Re: HRC Bellmouths for NC30
Posted: Mon Jan 09, 2012 11:25 am
Ali/Arbmoto is selling on ebay, would be nice to get a mould from so i can make a carbon one :Dmarcus57 wrote:
Nearly there now , just need the airtray
marcus :DRe: HRC Bellmouths for NC30
Posted: Mon Jan 09, 2012 11:35 am
Id love it but the bikes on hold till i sort the okiporndoguk wrote:Ali/Arbmoto is selling on ebay, would be nice to get a mould from so i can make a carbon one :Dmarcus57 wrote:
Nearly there now , just need the airtray