Looks mint that Steve! Just as a matter of interest what cleaning products/methods do you use? Certainly does the trick!

Kris

I'm a fan of muc-off, gunk, a selection of brushes, wd40 and lots of cloths. I also use a cutting compound to refresh paintwork. used carefully it brings up old paintwork a treat ready for polishing.

Pretty much what I use. Do you just use autosol or metal polish for the exhausts?

Kris

wet and dry (quite a fine grade, used wet) then autosol

nice!

Will try that on the duc!

microfibre cloths rock for this. kind of thing too, you get a lovely smooth finish.

messy job but works wonders...






if anyone would like their pipes done...

banoffee wrote:wet and dry (quite a fine grade, used wet) then autosol

Steve, did you know you can get wet & dry pads, there kinda foam backed, proper body shops do them. Would be perfect for doing exhausts. They go up to 2000 grit maybe more.

Drunkn Munky wrote:Steve, did you know you can get wet & dry pads, there kinda foam backed, proper body shops do them. Would be perfect for doing exhausts. They go up to 2000 grit maybe more.

yeah, thanks. have used them before

Calipers cleaned and fitted with new pads




Wheel cleaned up and fitted with replacement (used but excellent) discs and new stainless disc bolts

mmmmmm ridiculously clean parts.