okay, i shall do that. just wondering, what is the correct gap adjustment for spark plugs...one of my plug is alot lover down...it almost touching the electrode tip...

xivlia wrote:okay, i shall do that. just wondering, what is the correct gap adjustment for spark plugs...one of my plug is alot lover down...it almost touching the electrode tip...

I think you'll be better off buying new plugs.

0.6 - 0.7mm is the correct gap

yep. thats what im gonna do. buy 4 new plugs.

Dude read the yellow box at the top. its not difficult, and its in bright yellow. infact take a moment to read the FAQ while your at it.

i have... and i did post it on part for sale section and typed in URGENT needing this blah blah...its kinda obvious that its WTB.. :\ but still got removed

No you posted it in this section twice.
look chap read the post, if you don't like the terms then feel free to post elsewhere, if it was removed then have a think why ? trust me, myself and the mods dont remove posts just because we are bored. simple as.

I do.











Just kidding. :D

okay, updates on the status of my piece of shit bike.... got my plugs are fired up using a blowlamp. clean like brand new.....put it in my bike.. works first time, bike runs great for 15-20 mins on idle....(set to 2000 rpm) and then the revs go down, and it cuts off....and the bike wont start again... it needs to sit there for about 2 hours before itl start up again...any ideas why its doing this.? cheers, i am gettin more and more frustrated with this bike -,-

xivlia wrote:okay, updates on the status of my piece of shit bike.... got my plugs are fired up using a blowlamp. clean like brand new.....put it in my bike.. works first time, bike runs great for 15-20 mins on idle....(set to 2000 rpm) and then the revs go down, and it cuts off....and the bike wont start again... it needs to sit there for about 2 hours before itl start up again...any ideas why its doing this.? cheers, i am gettin more and more frustrated with this bike -,-

Blocked fuel tank breather?

Bad vaccum pipe.

There are no shit bikes...

yeah its not shit.. i was just really angry at the time... vacuum pipe is working perfectly fine and the breather is also no blocked. all of this started to happen after i dropped my bike going at 5mph.... its ridiculous, could there be something wrong with the carbs? maybe the floats are stuck and its drowning the engine? or some of the holes in the jets are blocked? i havent checked this...maybe i should do that tomorrow.