whats the other bike about?

spares bike mate :) Already nicked the front downpipes, rear manifold and top rad off it :)

It's nearly ready to go back together, got an M10x1.25 tap and an 8.8mm drill bit on the way, then need some manifold to rear pipe gaskets and I can crack on getting it done and fitted. I'm seriously considering fitting the HRC oil cooler I have tucked away, I'm hoping it'll still let me keep the fan, just incase it gets a bit warm, but if not then no worries, it'll only be a case of remembering to keep moving or stop and let it cool if I find I'm stopped

whats wrong with the motor in the spares bike ?

Nothing major that I know of, but I was told it burns oil, so would rather not faff around swapping it out when I have an engine I can chuck straight in :)

It's the same one as in my project thread, matey has given me permission to break it up, he just wants some odd bits off it, like the jack up link etc

just how much is getting broken off it then ? i could do with a few things but i'm not in any sort of hurry.

I had a for sale thread up, but it depends what you want :)

Now you say that, I've got to reply to a few messages, cheers for the reminder :)

link ?

Here you go mate :)

viewtopic.php?f=17&t=29049

pm me if there's anything you want, will see what I can do for you :)

So close to getting the motor in, just need exhaust gaskets now :) fitted the NC30 ignition pick ups and new gaskets to the side casings, so its almost ready!

Got the gaskets, the engine is in the frame, with most of the ancillaries ready to go on, should be running by the end of the day :D