lizard821000 wrote:im shit at explaining lol

iv got a half yam system right now, but want to fit the tyga end can. can it be done? worth doing over the yam half system etc?

or will i need to revert back to the stock pipes to fit the tyga end can, ya get me>? lol

ha lol, only me, from looking at your pipe work on your bike i think the prob is if you take your can off at the mo theres not enough to then join the link pipe on and tyga can , as i had a simler prob with my elthos half systerm and ended up having to buy a elthos exhaust can to fit the pipe work as it was 45mm and the tyda can is 50mm , i think you could get the tyga can to work on your pipe work but its prob gonna cost £40-£60 + to have some one make a link pipe up at the right size and angle to take the can ,

measure the diamerter of the pipe on the back of ur can where it joins to the half systerm as you might be able to cut the can off and then use that as a link pipe as it kind a is at the mo and then slip the tgya can on to the end off that

if you know what i mean

sam

i know what you mean, just seeing if anyone has done this before......plus , would be a shame to wreck the pipe/can.....

it would be the easier way though. im sure i could MAKE the fker fit , somehow lol

be nice if gav could sell me a bit of stainless for that area then i could cut to fit. ill message him and see what he recomends.

i knoe if i just take of the half system and use your stock pipes, i could then fit the can right! but im also wondering if that would have a negitive effect on the performance over the half yam at the mo, if so, whats the point ay lol

ill get some messurement mate but i still recon ill have it anyways and just in my own time sort somin out.


shaun


so it would be somin like this once done...

Right just had a look at your bike and you need what i said, a GF link pipe.

This is my yam half system with a GF link pipe welded on and then a 3 bolt adaptor on the end.

thanks tony, looks exactly like what i need. GF? whats this? your girlfriend pipe lol ask her if i can have it.... na seriouse, do they sell these ready made or is it something ill need to get made then?

id rather not cut the yam too so this would be perfect.

LOL Graeme France, i think he sells em pre made. it did make the can kinda high level and i had to make my own hanger but it was an odd can, RC45 i think.

awsome :)

that gf racing on here aint it. what did that set you back tony? if you can remember

ill get some close ups of mine soon as it looks like my collector has been cut to take the yam half, this isnt a bad thing as i wouldnt want my new piece of pipe welded anyways, so i could rivert back if i wanted. its just held on by a clamp.

Yeah thats him, i seem to recall about £60 i think. The link pipe came supplied with a split so you can clamp it if you want, i just prefered to weld it in place.

ah that even better news then! cheers fella.

Flip that turned into quite the dick swinging contest!

If listed all I had a one point:
2 x TSR Titty SP1 half system with double cans
1 x Ethos full race system with single can
1 x Ethos half system with single can
1 x Laser half system race type with single can
1 x JHA half system single can
1 x Mercury Race Exhaust system (shotgun style) with custom build pipes to fit on Ethos full race system

And of course
1 x genuine standard Honda NC30 full system
1 x genuine standard Honda Nc35 full system
Various cans, pipeworks, y-pieces,

Most of these are sold, but I now have again 2 half systems in sight:
My old Ethos half system and an TSR half system, both with single can output.